TechArtLowering Spring Kit for 997 / 997.2 / S / 4S / GTS

TechArt lowering spring kits drop the car by 25mm (15mm w/ Sport suspension) for a more aggressive stance and better handling. 

This kit is fully compatible with the Sport button on your car, and will keep near stock ride quality and compliance for street use. Unlike some brands, these springs will not sag over time or cause the car to bounce on uneven roads. For optimal results we combine these springs with the DSC Sport Upgrade kit to improve response/compliance from the factory PASM controller. We also recommend using this spring kit with our Stage 1 rear-link kit in the rear for improved feel and a reduction in movement.

When lowering a car you can expect a geometry change and for the factory wheels to be a bit more tucked-in. We recommend using front and rear spacer kits to "push" the wheels back out to the fenders- for all 997 applications we use 7mm in the front and 15mm in the rear. We use the RSS wheel spacer kits. 

We used and tested this kit on our 997 PDK development car (AKA "ZTADPOL"). Example of lowered ride height shown on a 997.2 C4S

When ordering this product, please specify the model from the drop down list during checkout including if the vehicle is 2WD or 4WD (S / 4S / GTS etc). (No Turbo kit available)

You can see this product installed on cars in our project gallery:

• 2011 997.2 TT S with Tubi Exhaust & TechArt Spring Kit
• 2005 996 Turbo S Cabriolet Stage II, SharkWerks Suspension & HRE P40 Wheels
• 2009 997S SharkWerks Exhaust, Champion RS184 Wheels & TechArt Springs
• 2009 997S Stage 1 Power Kit & Suspension Mods, ECU and SharkWerks Bypass