2013 991 Carrera S HRE P40SC Wheels, Brembo Brakes & TechArt Aero

This agate grey SharkWerks project 991S graced the cover of Total 911 Magazine Issue 97, titled "991 Perfection" but that was round one. For a second helping an even lighter-weight set of HRE P40SC wheels and larger 380mm Brembo Brake kit was on the menu:

Just a quick test fit of the satin black HRE P40SC's...

Factory 4-piston rears:

And 6-piston fronts straight off of a Cayenne:

The Brembo big brake kit laid out. Including 380mm replacement rotors, SS lines et al:

Not only are the new rotors significantly larger vs stock but their two piece design (aluminium hat) is also lighter of course. So for those of us 911-weight watchers out there.... here come the fronts at 20.1 pounds:

vs stock 23.8 pounds

Front measurement

vs stock:

Front assembly installed:

Now the rears at come in at 17.1 pounds:

vs stock at 19.33 pounds

Rear measurement:

vs Stock rear:

Larger calipers and improved piston design does add a bit more weight back again. The new front 6-piston Monoblock Brembo yellow calipers come in at 12.1 pounds:

vs stock 11.4 pounds:

And the new 4-piston rears come in at 9.44 pounds:

vs stock 8.8 pounds:

Rear assembly also installed:

The newly released 991 TechArt roof spoiler was also added in addition to the full Type 1 conversion:

Time to go bed some brakes in following Brembos "break-in" procedure:

And a few beauty shots of HRE's satin black 20-inch P40SC Monoblok wheel:

The fronts:

And lowered with TechArt springs:

The full monty: