RSS / Road Sport SupplyWheel Spacer Kits for 996 / 997 / 997.2 / 991 / 991.2 Carrera / Turbo and 986 / 987 / 987.2 / 981 / 982 Cayman / Boxster

Product type: Wheels
  • 911 Turbo / S - 991.2
  • 911 Turbo / S - 991
  • 911 Turbo / S - 997.2
  • More
Size + Color
  • - Select -
View cart

Product Description


Please note - We can not accept returns on spacer kits unless the wrong item was delivered. We recommend measuring to determine your desired size prior to ordering.

If your car has a factory ride height and stock wheels with conservative offsets you can widen the track and improve the stance. On lowered vehicles the wheels tuck in even more and spacers can be used in front and rear (especially) to bring the wheels back out towards the fender. Please be sure on the sizing before ordering.

These kits are NOT for use with Centerlock wheel applications. Not recommended for GT4.

All RSS Wheel Spacer Kits:

  • Come in pairs (for front or rear of the vehicle)
  • Include locating pin & longer wheel bolts where applicable
  • Are available in two sizes and three color combinations:
    • 7mm silver spacers with silver bolts, $155
    • 15mm silver spacers with silver bolts, $195 
    • 7mm in black spacers with black bolts, $175
    • 15mm in black spacers with black bolts, $225 
    • 7mm in silver spacers with black bolts, $170
    • 15mm in silver spacers with black bolts, $210

Note - Picture shown is for 15mm Silver spacers. Smaller sizes (7mm) do not include the hubcentric ring extension, which is used to center the wheel onto the spacer. This is because the OEM ring clears the 7mm spacer and still allows you to use it for centering the wheel.

Due to the varying offsets of OEM optional and aftermarket wheels, it is recommended that you measure the gap to your outside fender to determine your desired spacer size prior to purchase. The spacers will add the specified width to the outer wheel position. Spacers cannot be returned due to improper sizing.

Recommended maximum sizes for most 996, 997, Boxster & Cayman: 7mm front, 15mm rear 

991 Models
For non-lowered 991 Carrera models the rear will usually fit best with a 15mm spacer. On S / Sport PASM suspension it may be better to use 7mm rear. For either, 7mm front is recommended. We recommend the kit that includes a silver spacer with BLACK bolts to maintain the stock look (stock bolts are black even with silver wheels).

All Models
If your vehicle has been lowered and you want an even more aggressive offset: 7mm front and 15 rear usually can be used. Keep in mind that aftermarket wheels will have different offsets/widths and backspacing, so you should measure the gaps prior to purchase.

You can see this product installed on cars in our project gallery: