RSS / Road Sport SupplyShark Werks Stage 1 Suspension kit - All 996 / 997 / 997.2 Models

Product type: Suspension
Application:
  • 911 GT3 RS 4.0 - 997.2
  • 911 GT3 RS - 997.2
  • 911 GT3 RS - 997
  • More
Views

Product Description

The Shark Werks Stage 1 rear suspension kit has been our go-to set up on every 991 (996-997) for the last 15 years. This kit is designed to tackle and reduce rear-end movement/flex and mid-corner toe-angle changes. This reduction in movement gives you more confidence in the turns and does so without additional noise or discomfort on the street or track. It also always for easier alignment and geometry changes associated with lowering kit (springs and coil overs). 

The kit includes four rear upper-links, rear toe-steer and lock out plates at a reduced/bundled price.

Designed for Porsches with aftermarket suspension, SharkWerks / Road Sport Supply's rear link kit allows the negative camber in the rear to be correctly adjusted to factory specifications, improving handling and road feedback.

On lowered cars, the OEM links do not allow for sufficient adjustment, which forces an improper alignment and leads to excessive tire wear. 

The Adjustable Rear Link (AKA, "Dog Bone") Kit was designed to eliminate this problem.

Static nodal stress plot

Additionally, the neoprene bushings have been replaced with steel monoballs, resulting in more direct handling feel and less movement among suspension components.

Adjustable link, a hammerhead shark, and Porsche OEM part from 2009 Carrera S.

On lowered Porsches with a factory toe steer link, the limited adjustment results in incorrect toe geometry. This part replaces the OEM part with a fully adjustable unit, allowing the toe to be adjusted to factory specifications.

The inner, neoprene bushing is also replaced with a steel monoball, which reduces dynamic changes in rear toe and further tightens up the car's handling.

You can see this product installed on cars in our project gallery: